Your cart is empty.
Your cart is empty.Product Description
The Story About Us
Quickun specializes in a wide range of silicone tubes, plastic fitting, metal fittings, stainless steel fittings and other accessories.
We develop tools and products according to our own and customers' actual needs and expectations, and strictly control all links from the factory to the consumer.
Thank you for your trust!
Plastic Hose Barb Fitting Thread White Adapter
Plastic Barb Fitting Adapter
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule.
- 100% new and high quality material.
- The Teamsale Metals hose fitting has a 90-degree elbow shape.
- Easy to install and not easy to drop off, good strength and durability.
- Fitting connects to hose on one end and has an NPT male connector on the other.
- Thisadapter is for a fixed connection between plastic or rubber hose and pipe madeof copper, nylon, or plastic.
Tips:
It is radiation stable and is good to solvents, chemicals, water and other inorganic environments. It stop most mineral acids and bases; however, it is subject to attack by oxidizing agents.
Joseph J
2025-08-25 15:02:48
This is exactly what I needed to attach to the top of a Humidifier Flush device. The threads are the same top to bottom (MIP) and make the seal by contacting the rubber washer at the bottom of other piece. A tapered NPT fitting would pose a risk to split the plastic of the piece I was screwing this into. No leaks no problems. Just be sure this is what you need!
Douglas Rozeboom
2025-08-02 13:35:49
Common size for residential garden hoses. Ordered twice now. Simple., No rust. Don't waste your time at Lowe's or home depot, they don't carry it. This is a better price anyway.
James Michailides
2025-07-27 09:34:23
They were the wrong size for the filter I purchased from Amazon
OceanBlue
2025-06-08 14:07:53
Great product that did its job as expected
David R
2025-05-12 17:59:55
Needed this for my water filter, which has a drain valve for each filter housing (have a triple 20†BB while house water filter). Since this will never be a high pressure setup, sealing them isn’t important. Just needed to use this and a hose to prevent splashing to a bucket.
Jeffrey A Beaman
2025-04-13 12:50:31
"Male Thread" is NOT pipe thread (MNPT). Possibly it's the smaller British Standard Pipe Tapered (BSPT) which is very rare in the U.S.I can't use this. Discarded the pack - not worth returning for exchange / refund.Very annoying.
Bo
2025-01-27 12:51:09
Value
Rick Keyes
2025-01-20 10:13:18
The barbed end is fine. The threaded end is poorly formed, as I used 5 wraps of teflon tape (as I have on numerous occasions) and the fittings still leaked through the threads. I knew they were different, as I could thread the barb all the way into the female fitting by hand until it bottomed out. If you plan to use this product, be sure to use a lot of teflon tape. Other 3/4" NPT fittings I have used start to tighten up long before bottoming out.
Eric S.
2024-12-23 17:59:35
3/8" Barb to 1/8" Male Thread White Adapter Union Fitting purchased
Recommended Products