Shopping Cart

Your cart is empty.

Your cart is empty.

SENSKY BS010BW DC 12v to 24v 3A Mini Dimmable Pir Motion Sensor Switch Occupancy Sensor Switch for Gun Safe, DIY LED Lighting,Kitchen Cabinet(White)

Free shipping on orders over $29.99

$9.99

$ 3 .99 $3.99

In Stock

1.Style:Button Adjustment With Dimmer Black


About this item

  • 【PIR Motion Activated】The PIR motion sensor switch can detect human movement through infrared rays emitted by the human body to automatically control lights, etc
  • 【Easy to Operate and Use】The latest PIR motion sensor can precisely adjust the light intensity, delay time and light sensor with just push of a button.No more adjusting values with a screwdriver to save you the trouble.
  • 【Quick&Accurate Dimmable and Delay Time】Dimmable default setting100%, Adjustable from 15%, 30%, 45%, 60%, 75%, 100% by long press; Delay time default setting 15s(15s,30s,60s,3mins,5mins, 15mins, 30mins adjustable)
  • 【Light Sensor Adjustable】ON/OFF mode (ON: 35Lux, OFF: Turn Off the sensor).If light sensor is on:only when the ambient brightness is ≤ 35Lux and detects moving,it will turn on the light automatically within the sensing range.If light sensor is off,whenever it detects motion,it will turn on the light automatically
  • 【Wide Application】Widely used for 12V/24V DC constant voltage LED light, LED strips and automatic sensory device. Provide you with satisfactory after-sales service



Product Description

Dimmable Pir Motion Sensor Switch
Dimmable Pir Motion Sensor Switch
Dimmable Pir Motion Sensor Switch
Dimmable Pir Motion Sensor Switch

Description:

PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more...

Attention:

1. Don't exposed to direct sun light or lighting, big wind, near a heater or air condition.

2. Don't fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though.

3. Don't fix it in strong shock or vibration environment.

4. The PIR Sensor requires a 'warm-up' time in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.


Michael Raphone
2025-08-29 09:37:54
Excellent product - plugged it in and set the variables - 1 minute later it went to work perfectly.
Customer
2025-08-21 18:34:05
Installed it & it works well!
Travis L.
2025-06-19 15:53:38
Works great. I had to cut and splice this into my harness, but it performed flawlessly!
J. Moores
2025-06-01 13:21:14
It just works. I only had to plug it into my LED light strip. The little instruction sheet it comes with explains every feature.
RegorP
2025-05-30 18:09:32
Changing the settings? Start with the brightness where you can see the results and figure out how to count flashes. Changing the settings for duration was the hardest. The flashing count was hard to count and measuring how long the light is on without triggering the IR is iffy. I ended up using the ambient light cut off to block the IR sensor.
Matt Alloway
2025-05-19 11:59:51
The media could not be loaded.
david kilventon
2025-05-18 14:39:59
It works well for small LEDs. I used it with a M12 batter adapter to power some LEDs strip lights.
Lora L. Hish
2025-03-16 18:01:33
It is working great however the instructions for the inside buttons was not clear for the on/off. I thought that on/off simply meant the sensor is on or off but no, when I had it set to on, there was quite a delay of time before the sensor would activate. Once I set to off then it turned on as soon as it detected motion. I almost returned it thinking it wasn’t working right. The other thing I feel is impractical are the two mounting holes. They’re too tiny to accommodate a screw IMO. I may need to use a double sided sticker and then cable mount the cord which I planned to do anyway. It’s working great otherwise!
william finch
2025-03-02 13:49:15
Works great, install is simple and it works with LED lights which a couple other motion sensors i tried didn’t
Matt
2024-11-29 14:58:19
It's really what I need but I came to reward comments because on day 2 here the sensor keeps turning on lights in an empty room.. I still give 4 stars for now because it's near a heater and the package says it detects infrared so it may be heat activated ...or something..
Recommended Products

$77.25

$ 30 .99 $30.99

4.9
Select Option