Your cart is empty.
Your cart is empty.The STKR Parking Sensor is designed to take the guess work out of parking your car in tight garage spaces. It features adjustable, ultrasonic range-finding technology. Simply mount the sensor unit in front of your vehicle at bumper level, then mount the signal light in a position easily viewed from the driver's seat. Lastly, park your vehicle exactly where you want it and press the set button. That's it! Next time the driver approaches the Parking Sensor, they will see a green light indicating that it is safe to proceed, then a yellow light warning to slow down, and finally a red light when the chosen stopping point is reached. The STKR Parking Sensor eliminates the dents and dings from garage "fender benders" and allows you to safely close the garage door every time. Easy to install with the included double sided tape and Velcro, and adjustable between 6 inches and 6 feet. New upgraded version is powered by standard USB cord or 4 AA batteries (not included).
Terry Brown
2025-09-04 10:40:40
This is definitely a first-world problem, but parking the car in the garage varies dramatically between a bike rack and bikes fitted to the car vs. not. When the bikes are on the car's rear tow hitch, the car needs to be around 3 feet further forward in the garage to clear the door. A neighbor showed me this device and I immediately purchased one as they were on sale. It seems well-made and was very simple to install using the supplied Velcro for the main unit and the sensor below. There are two options for powering the unit, either 4 x AA batteries or via a USB cable. The unit is not supplied with a USB cable or power supply but most households now have a kitchen junk drawer that has plenty of these from other products. And if not they are readily available to buy at a low cost. I connect mine via the USB cable as there is an outlet close to where the unit was fitted. Setting up the parking distance is a simple case of pressing the red button on the front. I have it calibrated so I can easily judge the ideal parking distance for when the bikes are on the car, or not. Not sure how long the Velcro will stay stuck as the garage is hot during the summer but so far its staying put. Overall a great purchase.
DWilson
2025-08-21 12:57:54
Got a new car that didn't have parking assist technology. I park my cars in the garage and this great little device provides warning when to stop so as not to hit garage wall. Much better than the old hanging tennis ball and not the trip hazzard that tire chocks present.Light turns green on entry into the garage space, then yellow when approaching the stop distance (that you can personally set from 6 in. to 6 ft.), then turns red when you hit the custom set stop distance. Simple to set up and install..
BNPTTC
2025-08-19 20:11:19
Easy to set up, works well. Battery life is a joke. Requires usb power supply. Cycling on and off whenever ambient lighting changes drains Battery within a week
V. Roberts
2025-08-18 12:07:18
So far one star. The clips seemed far too small to fit on my garage door tracks. The company should specify the size of the track this product fits in the description instead of assuming all tracks are the same size. After contacting the company, I came to realize that the clips would fit if I pushed very hard. The description should include the dimensions of the track this product is designed to fit, and a diagram or drawing of how to install the clips.Once I installed the clips, I discovered another, fatal, problem. On my garage door the fitting that attaches to the wire from the counterbalance spring wraps around the track and hits the clip for the side sensor as the door comes down. This product will not work with my garage door unless I find a way to mount the sensor to the wall of the garage instead of to the track. It would have saved me a lot of time, and Amazon and STKR a lot of money, if I had been told about this incompatibility before I purchased the sensors. As it is, the two sensors I purchased will probably have to be returned.I'm raising my rating from one start to three, because the sensors do work. But three stars instead of five due to the problems with the track discussed above, plus two additional issues.I managed to mount the clip that holds the sensor on a wood block using two #6 screws, and then I mounted that wood block on a stud next to the garage door. I am not using the door tracks at all. So, now on to the issues.The USB power cord provided with the sensor is 1 FOOT LONG! That is a joke. Even people who may have power outlets in their garages would not likely have one within one foot of the sensor. Why supply a UBS power cord at all if it is going to be ONE FOOT long? I have an outlet near the sensor, but I needed a 6-foot USB cord to connect from the adapter in the outlet to the sensor.The second additional issue is that the USB C power jack on the sensor is at the bottom of the ultrasonic sensor itself, not on the body of the device. The sensor is attached to the body with a rather fragile plastic arm. If the power cord is somehow snagged or pulled that could cause the arm with the sensor to break off of the main body. I can't figure out why any engineer would put a power socket on fragile arm instead of on the far more robust body of a device.
Robert Sigg
2025-06-15 17:31:34
Works perfectly, however best to use power instead of battery.
Joanna H
2025-05-24 10:33:07
Every time I used to pull into my garage I would hit the folding able saw and stepladder leaning against the back wall of my garage, say oops!, and then back up a couple inches. This has saved my bumper and was SO EASY to install. I worried if the items adjacent to the stop sign on the wall of the garage might constantly trigger the sensor but that hasn’t been the case - I think the sensor points narrowly straight ahead, which is perfect . My car is so happy and I don’t have to say oops anymore
Ifrdriver
2025-05-03 13:35:29
Use these to make sure I am far enough so my garage can close. Drive in until I see the green go to yellow slow down and stop when the light turns red. Perfect distance everytime. Connected a to a cable so as not to use batteries. Chews up batteries pretty quick, but direct wired is fantastic
BeFamousVideo
2025-04-24 13:32:24
After owning this parking sensor aid it stopped working after the 30 day return period. I thought the unit was defective. The unit started to malfunction with lights burning out. Then began flashing green and no longer would change to yellow lights or the red lights as vehicle would approach. This was used inside the garage in a controlled dry environment. I also changed the four AA batteries and that didn't help. As I was about to toss into trash I noticed the USB charging port. Regardless of having batteries this unit also needs to be charged again to work properly. Once charged it works great again. I'm not sure what the 4 AA batteries are doing.
Mgbman
2025-03-28 12:03:20
It was easy to setup and makes perfect parking in our smaller garage very easy and exact and as expected. Excellent value for money.
Andre K
2025-03-11 10:33:21
It would have been nice to have a step-by-step guide of the installation process, rather than searching for a you tube video. Otherwise, it is a great help in a tight parking garage.
Rosalinda Gracida
2025-02-20 21:45:54
El sensor de estacionamiento sirve perfectamente como se describe. La programación de la distancia no puede ser más fácil y sencilla. La única recomendación que yo hago es que no confÃen en el velcro para asegurar a la pared la unidad de aviso con luz. Lo mejor es instalar un tornillo en el muro y utilizar la endidura que ya tiene el aparato en la parte trasera. A la vez de quedar firme, permitirá retirarlo para hacer el cambio de baterÃas. La señalización de color al aproximar el vehÃculo pasa de naranja a rojo (al menos en mi caso, nunca prende el color verde). El sensor no pesa nada, asà que el adhesivo provisto me parece más que suficiente. Asà que me parece perfecto y súper útil su funcionamiento. Lo recomiendo ampliamente.
Nicolas G
2025-02-05 15:12:51
J'ai installé l'appareil sur une planche de bois afin de l'ajuster à la bonne hauteur par rapport à mon véhicule. Je regrette que le fil reliant la centrale au capteur ne soit pas amovible afin de le faire passer au dos du support. Je regrette également qu'il ne puisse pas être branché sur un transformateur afin de ne pas utiliser de piles. Côté fonctionnement je le trouve précis et réactif. J'ai conservé les réglages d'usine et il détecte mon véhicule a 3,5 mètres environ et lorsqu'il s'allume rouge ma voiture se trouve à 15 cm du capteur. Pour moi c'est parfait c'est ce que je souhaitais. Le prix peut sembler un peu élevé mais si le produit dure dans le temps, je ne regrette pas mon achat.
CM.
2024-12-10 16:24:33
pas facile a adapter
Recommended Products
