Your cart is empty.
Your cart is empty.Features The frequency divider is equipped with wiring terminal swhich is very convenient for wiring. If you add a horn plug spring,you can achieve free welding.The marked input on thecrossover board is connected to the rear box or power amplifier,andthe high and low are connected to the tweeter and woofer. If it is a singlefull rangejust put the high and low +polar lines together;if it is a single bass or a single treble just leave the other channels empty. High and low frequency divider wiring
Homebody
2025-08-31 11:55:03
Easy to use . Easy to install . Only takes a minute to set the jumpers for sound , not sure why that is a problem for some people .
Adub
2025-08-28 17:30:57
I was curious after watching youtube vids on crossovers what i had in my Polk Audio Front (5.1) speakers. Upon inspection I found the crossover in this $600 system, consisted of a 4 micrfarad cap and a .3 microhenry coil. i thought i'd check out some cheap 2 way crossovers, they had to be better than what i had. These Robot crossovers, after i removed these green things because the were impossible to use, made my speakers sound WAY better and I would recommend them. for $12 a pair you can't beat it
Homebody
2025-08-07 14:31:00
Easy to use . Easy to install . Only takes a minute to set the jumpers for sound , not sure why that is a problem for some people .
Adub
2025-07-22 18:26:08
I was curious after watching youtube vids on crossovers what i had in my Polk Audio Front (5.1) speakers. Upon inspection I found the crossover in this $600 system, consisted of a 4 micrfarad cap and a .3 microhenry coil. i thought i'd check out some cheap 2 way crossovers, they had to be better than what i had. These Robot crossovers, after i removed these green things because the were impossible to use, made my speakers sound WAY better and I would recommend them. for $12 a pair you can't beat it
bornu
2025-07-03 10:59:26
I used this in a bass guitar amp, hoping to separate the mids from the lows, since the amp itself is uniquely configured, with a single 15" and two 8" speakers. This crossover didn't feed anything at all via the high channel, so I've removed it. I only got output via the low channel. I contacted the manufacturer to get advice on how to configure the high channel for mids, and their advice was literally to try different setting of the jumpers, and see what happens. I tried all variations, with no success. I have tried several similar units, with equally unsatisfactory results. I'm tired of returning them.
Shaffeek
2025-06-24 16:44:01
Great job identifying the terminals easy to connect
Cheryl
2025-06-15 12:21:50
Used these in a complete budget-priced rebuild of a couple of small Yamaha PA speakers. Super easy to install (all connectors are marked screw terminals). No soldering necessary. Speakers sound great!
tjs
2025-05-27 14:32:45
The crossover worked great for my application but good luck trying to decipher the instructions.They are poorly translated (made in China).
bornu
2025-03-26 20:20:55
I used this in a bass guitar amp, hoping to separate the mids from the lows, since the amp itself is uniquely configured, with a single 15" and two 8" speakers. This crossover didn't feed anything at all via the high channel, so I've removed it. I only got output via the low channel. I contacted the manufacturer to get advice on how to configure the high channel for mids, and their advice was literally to try different setting of the jumpers, and see what happens. I tried all variations, with no success. I have tried several similar units, with equally unsatisfactory results. I'm tired of returning them.
Shaffeek
2025-03-10 13:12:06
Great job identifying the terminals easy to connect
Cheryl
2025-02-03 18:17:21
Used these in a complete budget-priced rebuild of a couple of small Yamaha PA speakers. Super easy to install (all connectors are marked screw terminals). No soldering necessary. Speakers sound great!
tjs
2024-12-27 13:15:23
The crossover worked great for my application but good luck trying to decipher the instructions.They are poorly translated (made in China).
Recommended Products
$26.86
$ 11 .99 $11.99