Your cart is empty.
Your cart is empty.Product Description
CENMING FAN28R FAN-53T Universal Ceiling Fan Remote Control Kit
Ceiling Fan Remote Controller
- This FAN28R FAN-53T Ceiling Fan Remote Control Kit with light dimmer works most 110V 3-speed AC ceiling fans, compatible with Harbor Breeze, Hampton Bay, Hunter, Home Decorators Collection and other ceiling fans.
Ceiling Fan Remote Control with Light Dimmer
- The green button is for dimming function, luminous feature of this button can help you find the remote in the dark.
- Light Dimmer compatible with all incandescent light bulbs and some dimmable LED lights.
- Most LED lights and all CFL bulbs are non-dimmable, light dimmer only supports the ON/OFF function in that case, and it may cause to flicker when using the dimming function.
Suitable for Ceiling Fans with Reverse Function
- NOTE: The reverse switch is located at motor housing. Shut the fan off then wait until the blades have completely stopped before flipping the switch to reverse the direction of your ceiling fan.
Wide Compatibility
- This FAN28R FAN-53T ceiling fan remote control kit compatible with Hampton Bay, Hunter, Harbor Breeze, Home Decorators Collection, and many more 110V 3-speed AC ceiling fans.
- Compatible with most downrod style fans, not recommended for use with hugger style fans.
- Compatible with incandescent light bulbs and some dimmable LED lights, other non-dimmable LED and CFL lamps only support ON and OFF function.
Easy to Install
1, Setting the codes on the remote and receiver
NOTE: It is imperative that the code used for both transmitter and receiver is exactly the same, otherwise remote will not work.
The default settings is 0000, and it is not recommended.
2, Installing receiver in ceiling fan
Remember to disconnect power. The electrical wiring must meet all local and national electrical code requirements. The electrical source and fan must be 110~120 volt, 60Hz.
Do not use this product in conjunction with any variable wall switch.
3, Operating transmitter
Install a 9V battery(NOT INCLUDE in the Package) in the remote, and there will be work.
Customer
2025-09-06 18:25:29
We had our original remote for our ceiling fan since 2008, when we first bought our home. It's 2024, and this remote works so good! I'm sure it will last as long as our ceiling lasts. It came with a little holder that I put on the back of our little lamp table. I used doubled sided tape to attach it. So convenient! And saves space. Yes, it was the same exact model as the old one. Made very well! I got it in an XL.
NAS
2025-09-03 10:04:41
Love this remote. I simply put in a battery and turned on my fan. Was so simple and works great.
Zed
2025-08-03 14:26:03
Works great and appears to be the same quality as the original 20 year old remoteI'm very pleased
mandy marzorati
2025-07-30 12:52:45
It’s was easy to install, this was my first attempt at anything g electrical. I will say it is slow to respond than the original.
John C Hearn
2025-06-26 11:43:27
Harbor bay fan controls are dependable and relatively easy to install, depending on the location of course. Wires are marked so not much chance of miswiring! Price is better than big box stores.
Wayne Salvatti
2025-05-21 10:26:58
We needed a replacement for our 20 year old house ceiling fan and by using the serial number on the back of our old remote we were pleasantly pleased that this company had an exact duplicate of the old one for a great low price! shipped promptly,well packed great low price-recommended vendor!
Adam
2025-03-15 19:08:25
I installed this unit with a brand new fan about 2 years ago. The fan ran slower than my other fans and the lights were dimmer but I assumed that my new fan/light just sucked and it felt like too much work to remove it and exchange it so we lived with it. Over the last two years the remote “workedâ€â€” mostly. You had to press the buttons really hard and do it multiple times for it to adjust the fan or turn on the light but you eventually got there. This week the fan light was too dim to be comfortable. I assumed the fan unit itself had gone bad so I bought a new one and replaced it but kept the same remote. After installation of the new fan, I still had the exact same problem. I measured the voltage coming into the fan from the box and it was 50. I removed the box and it solved the issue. Without this remote unit, my fan speed is correct and the lights are bright. I guess I didn’t need a new fan in the first place.As a side suggestion, do not use the adhesive on the remote to hang it on your wall. When I removed it, it took a giant chunk out of my drywall.
Tb320
2025-01-14 10:08:24
This unit not only gives you control of fan speeds, on and off, but does it remotely. This unit costs less than a wall speed switch plus you get remote control. So, I installed a simple on-off wall switch to replace the defective wall speed control switch and installed the wireless control unit in the fan. It is easier to get at the wiring if you take one fan blade off. Then just hook up the input wires and the output wires which are clearly labeled, with the supplied wire nuts. If you have more than one remote fan control, you might want to set the DIP switches to an unused code combination in the controller and remote. Also a piece of a cake. Install a 9v battery in the remote control and sit back and enjoy the breeze. Installation took less than 30 minutes including time to dig out the ladder and put it away.
CASIANO GARCIA OJEDA
2024-12-27 14:33:05
Buen producto llegó en buen estado y funcionando
Bernardo M Jimenez
2024-11-30 17:31:06
Buen reemplazo para el control de un ventilador hunter
Recommended Products