Your cart is empty.
Your cart is empty.Product Description
Easy Operation:
Step 1: Solder the IC socket to the PCB circuit board.
Step 2: Insert the chip into the IC socket, finish.
The IC socket is the carrier between the chip and the PCB circuit board, the chip can be pulled and inserted directly without soldering to the PCB board.
Noted:
The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Advantage:
When you need to install or replace the chip, directly remove the connection between the IC socket and chip, achieving the effect of saving IC cost and time.
Feature:
Great electronic component for PCB board, IC socket has strong heat resistance, it can withstand repeated welding and disassembly without damaging the chip.
SpeedD408
2025-06-15 13:48:54
The work perfect. There were no bent pins and they seem to make a very good connection to the IC.
jesse lopez
2025-06-08 12:30:35
The pins are so frail they bend too easy.Difficult to solder as if you leave the heat on for 2 seconds, the solder wicks up through the large cracks…
Edward Lui
2025-05-06 13:28:16
Tube was bent in half and damaged some of the product pins
Joel Saunders
2025-03-17 12:04:53
These are great for the hobbyist such as myself.
dankrill
2024-12-18 11:24:16
use this for my pic processor projects on prototype PCBs, they work just fine.
Recommended Products