Your cart is empty.
Your cart is empty.Product Description
Adjustable Angle,Adjustable Height,Relieve Stress.
Simple Assembly:
1.
Open Package
2.
Pull Up the Bottom
3.
Pull Up the VESA Plate
4.
Take Off the Plastic Cover
5.
Point at the VESA Hole(100*100 or 75*75mm)
6.
Fix the KM4*12 Screw
7.
Cover the Plastic Cover,fix the KM3*6 screw
8.
Done
Suitable for monitor with VESA Hole 75*75mm 100*100mm
Some Monitors Require Removal of Their Own Stands
Not Suitable for Monitor Without VESA Hole
Not Suitable for Monitor With Connectors on the Backside Like Picture Show
Application
Wearson WS-03A is Suitable for Touch Screen LCD Monitor,All In One PC,TV,etc.
coach316dc
2025-08-26 18:28:06
This was exactly what I needed for my computer monitor. To give you some background, I had purchased some desk organizers to help keep my desk tidy. One of them being a monitor riser with storage and shelves. Due to the fact that my desk is an armoire style, vertical space is at a premium on top of my desk.The monitor on its own stand was too tall, and the stand was not adjustable.....at all. I needed something short - VERY short - to replace the stand. I found this unit that looked like it would go from 90 deg to 0 deg. Which it does. Beautifully. I installed it, folded it to where I needed it, and it now fits perfectly between the riser and the armoire. The edge of the monitor is sitting at exactly 1/4 inch from the top of the riser.The stand came with screws that fit the VESA mounts on the back of the monitor.It is extremely adjustable.It is very easy to install.The monitor is as sturdy on this stand as it was on its own stand, if not more sturdy.The joints of the stand are quite stiff. I found it difficult to adjust with my hands even without anything attached to it. BUT....I would rather have them too stiff than not stiff enough. Once mounted, it was easier to adjust than I expected. At first I thought I would bend or break something on the monitor trying to get it in position but it was fine.I would definitely buy this product again and highly recommend if you're needing a replacement stand for TV or monitor.
Jack Hayes
2025-08-14 17:11:07
This is an amazing stand for Elektron Syntakt, Digitone series with Vesa mounting holes in the back. The stand is sturdy, with very "stiff joints" so the attached devices don't shake/wobble, and stay perfectly in place when/after playing. It can be a bit of work to adjust, but you can set it and forget it once done, and don't need to constantly adjust angle/tilt (like most monitor arms out there).Photos attached shows ways this stand can be used for Syntakt and Digitone, and as noted above, the height and angle are super adjustable, but it stays in place while playing (see how the two units can be almost perfectly flush against one another in the side by side photo) with zero noticeable wobble.My only complaint is the stand is too "tall" some time. The bottom of the digitone/syntakt measures to be about 1.75'' from table surface when the stand is all the way down, but all the benefits noted above more than makes up for this.This might be a super niche comment - If you use Output Sidecar, Syntakt/Digitone fits perfectly in the drawer above the 19'' rack without the stand, but with the stand, too tall by about 0.25''. I've had to relocate the Syntakt/Digitone after getting the stand, but it is definitely worth it.To summarize - This stand is slightly pricier than some others on amazon, but it's totally worth it. I'd highly recommend buying this stand if you have any of those elektron gear with Vesa mounting holes (i think digitone, digitakt, syntakt, analog heat, analog heat+fx).
Kerre J. Grant
2025-07-27 13:39:03
Super solid.As it arrives, it looks like it wouldn't fit my old monitor. But if you extend the mounting portion flat, the plastic trim piece slides off, exposing a metal plate with all manner of pre-drilled holes.Use the long screws to connect the monitor to the mount,Slide the plastic trim piece into place (with the brand sticker on it)Use the included small screws to attach the trim pieceThe hinges are very stiff. This is by design and it's what you want.Be smart when adjusting the angle and height of the monitor after assembly, a delicate monitor could break if you just reef on it. Apply pressure to the stand itself.Worth the money and exactly what I wanted.Allowed my Samsung S24E310HL monitor to sit 4" lower and at a better angle than the manufacturer stand.The base has cutouts if you wanted to mount it to the wall (third photo... wall mounting hardware not included).And, for those who care, the included fasteners are JIS (Japanese industrial standard) and not Philips head. They look the same, and a Philips screwdriver will work, and it's design is prone to stripping out a JIS fastener if enough pressure isn't applied. JIS driver will slot in for a much more secure hold. If you are into hand tools, a JIS driver is a joy to use. Treat-yo-self!Enjoy! And buy with confidence.
cyberpsycho
2025-07-21 10:08:32
The piece itself seems sturdy enough, but if your monitor's power outlet is in the back/center, or close to it, you may not be able to plug it in. Might not be a problem if your power connection is on the bottom or side of the monitor, or if you have one of those angled flat plugs. So check first. Surprisingly, in spite of the stiffness, you'll still get a little side wobble if you use it with a touch screen. Otherwise, it's probably an adequately functional piece. Unfortunately, I had to return mine. Couldn't use it with my Asus VS247.
Alejandro Carmona
2025-07-15 14:08:44
Muy buena opción para darle una segunda vida a una pantalla o monitor.Yo tenÃa un monitor sin base y le dio una segunda oportunidad.
Hato no Kami
2025-06-26 15:42:06
Got it to hold my Cintiq 16 at multiple different angles as I draw, and upright like a monitor while not in use. I am pleasantly surprised by the value. It is nice and bottom heavy so I don't have to worry about it tipping over.It was a little too stiff right out of the box, trying to change the angle by grabbing the side of the monitor would have eventually damaged the monitor. That may not be true for all monitors with their differing weights, mine is a little lighter than others. Not a problem though, as the bolts to adjust the tension were easily accessible, and a slight twist on both sides with a pair of pliers and I was able to find the perfect tension for my screen.I will come back and try to update this review IF after moving it back and fourth for a while the tension loosens, or if I encounter any long term use problems. So far though it's the best value out there, and pretty much the only option for this specific use.
Rigu
2025-06-05 17:11:54
Schnelle Lieferung , gute Qualität . Etwas schwer zum verstellen dafür ist auch bei etwas größeren Monitoralles stabil und kippt nicht.
Barbara
2025-05-08 13:09:40
Ottimo prodotto
coach316dc
2025-04-28 10:53:41
This was exactly what I needed for my computer monitor. To give you some background, I had purchased some desk organizers to help keep my desk tidy. One of them being a monitor riser with storage and shelves. Due to the fact that my desk is an armoire style, vertical space is at a premium on top of my desk.The monitor on its own stand was too tall, and the stand was not adjustable.....at all. I needed something short - VERY short - to replace the stand. I found this unit that looked like it would go from 90 deg to 0 deg. Which it does. Beautifully. I installed it, folded it to where I needed it, and it now fits perfectly between the riser and the armoire. The edge of the monitor is sitting at exactly 1/4 inch from the top of the riser.The stand came with screws that fit the VESA mounts on the back of the monitor.It is extremely adjustable.It is very easy to install.The monitor is as sturdy on this stand as it was on its own stand, if not more sturdy.The joints of the stand are quite stiff. I found it difficult to adjust with my hands even without anything attached to it. BUT....I would rather have them too stiff than not stiff enough. Once mounted, it was easier to adjust than I expected. At first I thought I would bend or break something on the monitor trying to get it in position but it was fine.I would definitely buy this product again and highly recommend if you're needing a replacement stand for TV or monitor.
Jack Hayes
2025-04-19 14:50:17
This is an amazing stand for Elektron Syntakt, Digitone series with Vesa mounting holes in the back. The stand is sturdy, with very "stiff joints" so the attached devices don't shake/wobble, and stay perfectly in place when/after playing. It can be a bit of work to adjust, but you can set it and forget it once done, and don't need to constantly adjust angle/tilt (like most monitor arms out there).Photos attached shows ways this stand can be used for Syntakt and Digitone, and as noted above, the height and angle are super adjustable, but it stays in place while playing (see how the two units can be almost perfectly flush against one another in the side by side photo) with zero noticeable wobble.My only complaint is the stand is too "tall" some time. The bottom of the digitone/syntakt measures to be about 1.75'' from table surface when the stand is all the way down, but all the benefits noted above more than makes up for this.This might be a super niche comment - If you use Output Sidecar, Syntakt/Digitone fits perfectly in the drawer above the 19'' rack without the stand, but with the stand, too tall by about 0.25''. I've had to relocate the Syntakt/Digitone after getting the stand, but it is definitely worth it.To summarize - This stand is slightly pricier than some others on amazon, but it's totally worth it. I'd highly recommend buying this stand if you have any of those elektron gear with Vesa mounting holes (i think digitone, digitakt, syntakt, analog heat, analog heat+fx).
Kerre J. Grant
2025-04-03 15:55:44
Super solid.As it arrives, it looks like it wouldn't fit my old monitor. But if you extend the mounting portion flat, the plastic trim piece slides off, exposing a metal plate with all manner of pre-drilled holes.Use the long screws to connect the monitor to the mount,Slide the plastic trim piece into place (with the brand sticker on it)Use the included small screws to attach the trim pieceThe hinges are very stiff. This is by design and it's what you want.Be smart when adjusting the angle and height of the monitor after assembly, a delicate monitor could break if you just reef on it. Apply pressure to the stand itself.Worth the money and exactly what I wanted.Allowed my Samsung S24E310HL monitor to sit 4" lower and at a better angle than the manufacturer stand.The base has cutouts if you wanted to mount it to the wall (third photo... wall mounting hardware not included).And, for those who care, the included fasteners are JIS (Japanese industrial standard) and not Philips head. They look the same, and a Philips screwdriver will work, and it's design is prone to stripping out a JIS fastener if enough pressure isn't applied. JIS driver will slot in for a much more secure hold. If you are into hand tools, a JIS driver is a joy to use. Treat-yo-self!Enjoy! And buy with confidence.
cyberpsycho
2025-03-17 10:30:38
The piece itself seems sturdy enough, but if your monitor's power outlet is in the back/center, or close to it, you may not be able to plug it in. Might not be a problem if your power connection is on the bottom or side of the monitor, or if you have one of those angled flat plugs. So check first. Surprisingly, in spite of the stiffness, you'll still get a little side wobble if you use it with a touch screen. Otherwise, it's probably an adequately functional piece. Unfortunately, I had to return mine. Couldn't use it with my Asus VS247.
Alejandro Carmona
2025-03-14 13:11:17
Muy buena opción para darle una segunda vida a una pantalla o monitor.Yo tenÃa un monitor sin base y le dio una segunda oportunidad.
Hato no Kami
2025-03-07 14:55:22
Got it to hold my Cintiq 16 at multiple different angles as I draw, and upright like a monitor while not in use. I am pleasantly surprised by the value. It is nice and bottom heavy so I don't have to worry about it tipping over.It was a little too stiff right out of the box, trying to change the angle by grabbing the side of the monitor would have eventually damaged the monitor. That may not be true for all monitors with their differing weights, mine is a little lighter than others. Not a problem though, as the bolts to adjust the tension were easily accessible, and a slight twist on both sides with a pair of pliers and I was able to find the perfect tension for my screen.I will come back and try to update this review IF after moving it back and fourth for a while the tension loosens, or if I encounter any long term use problems. So far though it's the best value out there, and pretty much the only option for this specific use.
Rigu
2025-02-26 10:43:30
Schnelle Lieferung , gute Qualität . Etwas schwer zum verstellen dafür ist auch bei etwas größeren Monitoralles stabil und kippt nicht.
Barbara
2025-02-22 12:21:20
Ottimo prodotto
TPV
2025-02-19 13:44:20
Lo compre para un terminal Punto de Venta táctil y tenÃa dudas respecto a la respuesta del uso táctil. Soporta muy bien el terminal ofreciendo una resistencia adecuada al uso táctil. Queda muy plano y es verdaderamente versátil en lo que respecta a la inclinación, siendo robusto en cualquier posición. Creo que compraré más para otros terminales.
TPV
2025-02-11 18:40:50
Lo compre para un terminal Punto de Venta táctil y tenÃa dudas respecto a la respuesta del uso táctil. Soporta muy bien el terminal ofreciendo una resistencia adecuada al uso táctil. Queda muy plano y es verdaderamente versátil en lo que respecta a la inclinación, siendo robusto en cualquier posición. Creo que compraré más para otros terminales.
Recommended Products