Your cart is empty.
Your cart is empty.Product Description
Tim in VT
2025-08-29 17:14:39
If you have a above ground pool you need this pump. Stop fooling around with the toy pump that came with the pool and get something like this that moves a ton of water, has great pressure and built to last. We had purchased a large cartridge filter at a yard sale but it lacked a pump. Well after some debate i landed on this one and am i glad i did. This thing is quiet, so quiet compared to the original pump. And it works 4 times better. Its so quiet that i had to put a small ball in the strainer so i could tell it was running. Cuz the only noise i heard was a hum like a machine on standby but its really pumping and with great suction and pressure.
Beth Kennedy
2025-08-13 14:17:53
Perfect for my 15,000 gallon pool with QS1200 Intex Saltwater system. Hooked it up this weekend. This pump prevents the low flow error on my salt system as the first pump was too weak at .35hp. And the second pump, although strong at 1.5hp worked great for circulation, but pumped way more GPH (gallons per hour) than the salt system was happy with. This pump's GMH is within, and at the higher end of, what was needed for the salt system I bought to work properly. Over 48 hours running and working well together
Hanes
2025-07-24 15:17:57
I have been running this for almost a month and here I can confidently say as of now this pump is pretty great. I mounted it to a piece of wood. I bought some adapters to run it with my sand filter and it works great. During these 100 degree days I have it covered with a thick piece of flexible plastic to keep some sun and heat off and to keep it dry but on occasion it does auto shut off because it gets to hot. The only downside is there is not a timer switch but that is a small price to pay for how well it works.
fruitwerks
2025-06-23 13:19:09
The threads were not quite perfect. Depending on your fittings it might be tight or you might need a lot of Teflon tape. It is low power but it delivers. It is enough to run my robot and that is the most important thing. Like many others mention, there is an issue with the lid. I tried all kinds of hacks to make it work. I had no luck, I ordered 5 or 6 different o-rings that should have fit.My solution for the lid (that cracked on the top with normal use) was to grab this one ( https://www.amazon.com/gp/product/B092J33XBJ/ ) and use both o-rings. It is a direct replacement and appears to be of much higher quality. Hope that helps.
E. Reisman
2025-06-19 16:04:28
This pump is clearly advertised as SELF-PRIMING....but this is absolutely not accurate; it will not self-prime! I used this pump for a small duck pond and I placed it about 3 inches above the water line. I plugged it in and expected it to self-prime (pull water into the pump) and given that it was a mere 3 inches above the pump and less then 2-feet away from the pond it should work: NOTHING....the motor spins but without water inside the pump, nothing happens.The pump is quiet and seems to run smooth but it's lightweight and no way this thing is a true 3/4-HP, I doubt it's even 1/2-HP and in the end you once again get what you pay for but in so far as self-priming, it is NOTUpdate: the plastic cap/lid that fits over the filter has now broken twice! The design is poor with weak and thin plastic. It tends to leak but if you tighten it too much it breaks. This last time I lubed the threads and tightened it just enough to seal.....but after months of exposure to the sun, it cracked, now I need to buy a 3rd one for $28 and it's not easy finding/contacting the company. I would NOT buy this pump again!
Steve Weaver
2025-05-21 10:32:38
Oh WOW!!! This pump is GREAT!!! Quiet, powerful pump, great flow, not to mention a great price. Easy installation and very well made. I’m sure the lifespan of this pump is greater than the last.
Ernesto Mendoza.
2025-05-07 18:17:03
After 3 years still working like champ
Heiliger
2025-03-07 15:15:34
If you look at the advert for this product it shows a .75 HP motor but the pump shows .45 HP THP on the top of control box. Odd choice to limit the motor to .45HP but advertise it as 3/4. Technically yes. Its a 3/4 HP motor but that's NOT what your getting.Anyway. This is the second one I've gotten. We thought the old on we had died last summer after a lightning storm blew our GFCI outlet and then it the motor wouldnt turn over. Turns out that it had just sat for too long. Brought it in and manually turned it over and it started right back up.Pulled THIS one in for the winter and just reinstalled it. Didn't work so we put the old on back on. Brought this one in and gave it a manual turn over. Again. Started right up.I guess I'm good to go on pool pumps for a few years...Its cheap but works fairly well for a small Intex pool. Just don't believe that its a .75HP system. ONLY the motor is rated for .75. They REALLY should fix that.
Excelente
2025-02-21 12:22:05
Excelente, 100% recomendable
Oscar Jaime Velazquez
2025-01-28 13:54:00
El tamaño es muy pequeño, la compré para reemplazar una bomba de 0.5 hp, y ésta con 50% más potencia, ocupa mucho menos espacio. El nivel de ruido es muy bajo, y por la corriente que ocupa, pude conectarla a un enchufe inteligente, con lo que me ahorré el programador, y puedo controlar su operación desde cualquier dispositivo
Armando Antonio Gamboa Sánchez
2024-12-18 10:37:49
Es un equipo con excelente funcionalidad.
Alfredo cardos
2024-11-25 11:08:16
Hasta la fecha no me han hecho el reembolso ya tienes más de un mes que se envió el producto se devolvió por qué se apagaba a cada rato muy mal espero la devolución del dinero
Martin R.
2024-11-19 13:55:49
Espero y sea verdad lo que dice que es de 3/4 ka probaré y verificar el amp aver si si es cierto hay le platico pero se ve muyyyyy ...... X ...
Recommended Products
$259.00
$ 99 .00 $99.00
$258.00
$ 99 .00 $99.00
$299.00
$ 99 .00 $99.00