Your cart is empty.
Your cart is empty. Specification:
Name: Float valve
Material: High quality plastic
Color: white
Application: cattle, horse, pig, dogs, etc large animals water trough
Instruction: Can be accessed by water pipes, need to have water pressure
Advantages:
Used for 304 stainless steel water bowl, no rust, no deformation, clean and sanitary
The use of float water level floating principle control the inlet and outlet water switch, to achieve a constant water level effect, keeps enough water and always clean water
Float valve for water trough horse cattle auto filter
Significantly save more than 30% of the water when cattle drinking, reduce the sewage discharge pressure
Automatic bowl tank horse dog cattle Water Leveler PVC Auto Fill Float Valve
Hobby Woodworker
2025-08-26 15:58:48
These float valves WORK. And this is a miracle as I have tried at least two other float valves previously, and my other float valves would never turn off. This is simply a better design. 1) The water drips down into your water bowl or bucket via what looks to be about a 1/2 inch white plastic tube. 2) They actually shut the water off, when desired depth is obtained. It appears to be about a 1/2 inch black rubber washer that securely blocks the water flow opening.
Tom Hightower
2025-08-23 10:11:33
My water bowls get used multiple multiple times a day with a herd of huskies. This is a terrific replacement. I've used it for years and will continue to do so. No complaints. Rated 5 for ease of use, replacement and reliability.
John
2025-08-20 15:42:43
Easy install shuts off when the water feeder is full with no leaks.
Kindle Customer
2025-05-06 12:46:17
Product appears to work well. Excellent value for the low price. Easy to install.
W. Joel Porter
2025-05-05 13:06:09
Have an automatic dog water dish that used a rubber disk that the float would press on to cover the fill orifice. The rubber eventually degraded and stopped fully sealing over the hole. The water dish would constantly over-fill and flow over the side. Was not able to locate a replacement rubber seal. This valve fit into the dish. Was a whole lot cheaper than replacing the whole dish and came as a two pack. Very happy with purchase. Have other float valves on the property. Glad to know I've got a reliable, low cost replacement.
shannon@eckerd
2025-04-29 11:25:18
The float itself works (so far). But the threading is complicated. You need 2 adaptors to connect it to a hose and then it still leaks. It’s what you get for the price.
PNH
2025-04-19 13:11:25
I find that these last as long or longer than the “red†brand.
SOS Rescue
2025-04-13 17:11:15
Terrible quality. Absolutely do not work. They dont stop the warer from flowing - too weak. Waste of money!
Jose A. Casazza Murillo
2025-04-08 11:36:20
Buenos duran
Allan E.
2025-03-22 12:07:19
I used this valve in the reservoir for a garden watering system. It works perfectly. The float turns water off completely with only slight submersion, which allows easy adjustment of water level. One nice aspect is that the water level can be kept below the hole in which the valve is mounted, so the mount cannot leak. Another thing that I like is that, since the entire thing is plastic, it will never corrode.Attaching the valve to the input hose was a bit tricky for me. The thread is 1/2", and seems to be designed for some sort of compression fitting, but I could not find one that fit. I ended up threading on a 1/2" female pipe thread fitting which works perfectly. To make the NPT fitting seal on the straight thread, I used multiple wraps of yellow gas teflon tape, tapering from thinner to thicker as I wrapped. When the NPT fitting was threaded on, it encountered thicker teflon the further it was threaded, which seems to have cured the lack of taper on the valve threads.Other reviews have mentioned leaking due to debris in the water. True enough, but the same would be the case with virtually any float valve. As long as your water is free of debris, the valve will function perfectly. If your water has debris, you will need a filter no matter what valve you install.
trudy
2025-02-28 18:46:06
good price .easy to install and works well
Thomas
2025-02-04 18:43:20
They work well, I put them in a large stock tank to water my cows. The k my issue is if the water is off the cows start chewing on the valve to get water to come out. I plan on building a guard so they can’t touch it. Also I had some issues finding fittings that would attach but was able to find the right ones at a hardware store for about 15$
wade
2025-01-30 13:52:05
awsome.. works as expectedðŸ‘.
Recommended Products
