Your cart is empty.
Your cart is empty.Product Description
Features
- Hardened stainless steel
- Direct reading to 0.001"/0.02 mm on large clear dial
- Utilizes two separate needles for inch or metric readings
- Precision ground and micro-lapped Adjusting slide for fine adjustment
- Inside,outside,and depth measurements
- 0.100" single revolution
- 4-way measurements for inside, outside, depth and step
- 0.100"/2mm range per revolution
4 Ways of Measurements
Outside Measuring
Depth Measuring
Inside Measuring
Step Measuring
- Double measurement system: imperial & metric
- Coming with strong cases.
- Stainless steel
Specifications
Gregg Hinson
August 16, 2025
This seems to be a very well-made tool that is surprisingly accurate and smooth. They feel good in the hand and have both imperial and metric scales and pointers. Nice! I had my set calibrated at a lab and they were off by .001" over the foot span! Great at ANY price.
Primal00
July 29, 2025
Obviously not as good as Starrett or Mitituyo dial calipers but for the price the hold their own. Solid frame and smooth function. Pretty decent repeatability through calibration range. I have several accusize tools and yet to find one that wasn't worth the purchase.
Kyle S
June 21, 2025
For an inexpensive dial caliper this is a slick unit. It's well built and accurate. Having standard and metric units of measure is quite useful too.
Johnathan Unruh
June 10, 2025
Was a nice alternative to more expensive calipers but broke within a week.
Scot Stahley
April 21, 2025
I do pressbrake and lathe work in aerospace indistry with a tolerance of + - .005 sometimes less. These cetified and perform every bit as good as my 12" Starrett. I bought these for the metric by i find them to be my every day set lately.
Rick
March 20, 2025
We'll know more in a year or so, but out of the box it seems like a decent caliper.
Ross Rindskopf
March 18, 2025
I work as a maintenance/machinist at a printing business and use these things every day for the past 7 months. They're just as accurate and consistent as the Starrett and Brown and Sharpe calipers my co-workers use. The build quality is pretty good, no reason to complain. The case came broken, but super glue fixed that easily. Id say its a very good budget caliper.
Jackson
February 28, 2025
If it was 1/2 the price it would still be expensive for what it is; a poor quality caliper.1.- Broken/malformed case... this wasn't broken by shipping there just wasn't enough plastic injected in to the mould, and their quality control figured it was good enough.2.- Loose dial, and pitted plastic face.3.- Caliper rod, the bit the slides up/down the channel... it bulges a little, so it's not flat and is a little loose, so you can make tapping noises with it when your bored.Really the ONLY benefit of this over say a $10 digital one, is that it's longer and doesn't need batteries, however the quality is pretty low rung chinese. I would be surprised if Accusize Industrial Tools is paying over $8 a peice for these.
Gilles L.
February 10, 2025
It jams every 4-5 cm. I was delicate with it at the start, but it jammed and could only extend between 0 and 4-5 cm. I finally forced it a bit, and the gear skipped, so now the gauge is off. Then it jammed again at around 8-10 cm…
William Hamilton
January 1, 2025
There has been zero quality control from the blind chinamans factory. There is debris of some sort or a flaw in the manufacture as the jaws pass through .800 thou.Accuracy is in question it is not smooth. lots of stiction. send it back buy from another place more money better quality fire the the guy who made this one it's made from Chinesium.
Client d'
December 30, 2024
parfait
Recommended Products