Your cart is empty.
Your cart is empty.Product Description
Rapid Cooling Function
The special heat dissipation hole design allows the soldering station to dissipate heat quickly during use, which improves the service life of the soldering iron.
Knob Stepless Temp Control
soldering station uses a classic knob design for stepless temperature control, easy to use, simple and fast.You can easily read the real-time temperature with °F/°C dual display function.
Excellent Material
soldering kit adopts an integrated ceramic heater, Equipped with ergonomic high temperature resistant PVC cord, ESD safe. The handle has a built-in stainless steel tube to prevent high-temperature aging, high efficiency and long lifespan.We ensure a safer usage environment for you.
Erik Mathis
2025-08-18 11:09:47
I've been using this for the last few weeks. This has been one solid little setup. This is the natural progression from moving from the toy wand to a proper soldering station. I don't know what makes a good soldering station, but this must be it. Getting additional heads is pretty simple as it seems to use standard sizes. I love how quickly it heats up and the 10-minute sleep. I found the cord to be flexible enough and long enough. I did put a drop of white paint on the dial where the arrow is so I could see it better.
REID
2025-07-18 11:58:14
Because this may be the cheapest soldering iron than delivers everything you want to get out of the name brand product.
steve
2025-07-05 15:35:11
Lots of nice accessories which I really didn't need. I don't really care for all the digital stuff and settings, but it does the job well enough. I should have purchase the less expensive one with an analogue dial for the temperature.
Kaiser Soze
2025-06-22 13:56:56
As a long-time audio enthusiast and general tinkerer, I've been soldering wires off and on, mostly on, for most of my life. All this time I did without a temperature-regulated soldering iron. And all of this time I have burned through a good many cheap soldering irons that plug directly into the wall outlet. Never again. I decided to give one of these temp-regulated irons a try because of the number of irons that never worked very well because they didn't get hot enough, and that died early deaths. It was well past the time that I should have tried something different. So I decided to try one of this irons that don't plug directly into the wall outlet. The difference, in the ease of soldering, was a night-and-day difference. I had no expectation that this would make soldering so much easier. I was amazed at how much easier it was. The wires heat up perfectly, each and every time, and the solder flows perfectly, each and every time.I chose this particular product, the Bakon 969, partly because I always look for value. This is particular true when I'm uncertain what else I should be looking at. Since I don't have much reason to pick one over another, I tend to pick the one that looks most affordable. So I picked this one partly for that reason, and as far as I'm concerned I scored a home run. No regrets at all. Perfectly pleased, and only wishing that I hadn't waited so long to buy something that I should have bought a long, long time ago.
John
2025-06-16 15:13:24
After buying a couple of cheap soldering irons that CLAIMED to be a high wattage only to find they would barely melt solder at all and ended up going into the trash, I spent a few more bucks and bought this unit that came with everything. A quality iron holder with a functional tip cleaner and sponge, a big roll of good solder, and a temperature control that quickly brought the iron up to a temperature that made solder connections a breeze. They even included a solder sucker. I'm not only impressed with this kit, but I'm a happy camper. Highly recommended.
Diane Gundlah
2025-06-04 11:19:42
Can't go wrong with this station
WeInSC
2025-05-28 12:30:50
First off, I knew I was buying a cheap soldering station. Secondly, they don't know how to keep their Celsius and Fahrenheit straight. It heats up, who knows what the right temperature is, I don't think they even know. (I do have a contact and laser temperature sensor, let's just say it's off by more than 10%.)Upon initial fire up, following industry normal preparation procedures for first-time use of a soldering iron, this thing was a complete and utter disaster.Before even firing it up, I had asked the manufacturer about warranty. Their answer did not make sense in the world of Amazon. Good luck if you ever need to ask for warranty assistance. I solder things maybe twice a year, but with cheap stations like this, I'm going to need to spend a lot more in order to get a reliable operating device.The owner's manual also leaves a lot of things unanswered. Typical for a manual that might not have been written by somebody that knows the product. Plugging the product in should leave many questions for the manual writer to answer.A flashing red light does not get explained in the owner's manual that I have. Usually, a pilot light stays on steady and then flashes when it has reached proper temperature or it flashes until it reaches proper temperature and then go steady. This one, it just stays flashing.If you look at the thermostat, you will see a dual ring temperature gauge. They could have done so much better in getting the Celsius temperatures on the inside ring and the Fahrenheit temperatures on the outside ring and keeping those numbers straight consistently around the dial. Last I checked, Celsius is a lower number than Fahrenheit except on this dial.It's being returned. My initial excitement considering what came in the packaging has been murdered by the horrible execution of this product. If they would have just made something that stood up a little bit to what the promise was, this would have been fully acceptable. It's so bad that it is not acceptable.
T. Knew
2025-05-11 19:40:33
Let me first caveat by saying that I don't have experience with high-end hacko it other soldering irons, as I am technically an amateur. That's it, for what this thing costs, it gets the job done. The solder that comes with it however, not so good. Ended up pitching it. Definitely order yourself some better solder and better flux when you buy this
Benn Birch
2025-04-28 17:56:55
No joke, just like many others said, within seconds it burnt itself out. The temp control circuit is garbage and sent the thing through the roof. Made a puff of smoke and an audible POP and the ceramic heater was toast.... quite literally. Apparently there have been many others with this same issue. I figured it was an early issue and had been fixed since the initial release but apparently not or they still have old stock they're selling because I was shocked that this did this. Otherwise this was literally the perfect soldering set for me. The display was very nice and easy to read. The iron itself was comfortable and easy to use. Just the circuitry let it down in a big way. I put in for a replacement but it never arrived. Seller claimed it was out of stock. Just AVOID THIS ONE at all costs. Don't be like me and think "oh that'll never happen to me!" It will and you're just wasting your time. With both trying out this faulty item and by patronizing this seller. Trash trash TRASH!
Raina & Stuart
2025-02-21 13:59:48
I upgraded to this soldering station from an old 30w Weller iron I've been using for years. The difference is night and day. This iron heats up extremely quickly and holds a steady temperature. The handle is comfortable and lightweight. I would recommend this to anyone looking for a good quality soldering station at a good price.
Mahmoud Hemdan
2024-12-29 12:48:57
very good product, does what's intended to do.
Recommended Products