Your cart is empty.
Your cart is empty. Resolution: 0.1 °C; Accuracy: ± 1 °C (-50 ° C ~ 70 ° C)
Power Supply: 24V Power Consumption: Operating Relative Humidity: 20% ~ 85% (No condensate)
Compressor Delay Protection Time: 1 ~ 10 minutes (adjustable)
Cable Length: 1 M
Sensor: NTC Sensor
Sensor Error Delay: 1 minute
Operating Temperature: 0 ° C ~ 60 ° C°
Storage Temperature: 30 ° C ~ 75 ° C
Temperature Measuring Range : -50 ° C ~ 99 ° C(adjustable)
Package Included:
1x Digital Temperature controller 24V
1 x Temperature sensor
alex
2025-09-04 10:19:43
The media could not be loaded.
Eitan D Zur
2025-08-29 15:54:50
Works as advertised, easy to wire.
Colin Dietrich
2025-08-21 14:41:59
Works as described. The sensor is labeled as 'NTC' which strictly speaking means it's a negative temperature coefficient thermistor. For anyone trying to swap probes or fitting the probe in something I measured the following:Diameter: 4mmResistances (in ohms) @ Temperature (degrees C): 16.0 kΩ @ 0 C, 5.52 kΩ @ 50 C, 1.40 kΩ @ 100 CSince neither are specified in the product specifications, don't be surprised if they change in the future.
BobH
2025-08-18 11:35:03
The product info didn't explain if settings are stored during AC power loss (blackout).I was glad to find: they are!If it was off, it stays off.If it was on, it comes on again.Temperature setpoints are kept too.So this tolerates power interruption just like a mechanical thermostat would. Handy!
Garan
2025-08-13 19:09:57
This temperature controller was 220VAC but with the same voltage i connect to 120 volt and wors well too. I am happy with this purchase.Than you
Thonas
2025-08-11 12:12:04
This is absolute garbage. The instructions are a nightmare. So confusing and you can understand how to program it.
twanna hamlin
2025-07-24 13:32:02
Would order again.
R. Carpenter
2025-07-03 20:25:57
Yeah, Celsius is the worldwide favored temperature scale, but the biggest economy is STILL the USA which does everything in fahrenheit. This gauge doesn't allow fahrenheit readings.
GC.
2025-06-16 13:22:52
Using this to monitor temperature of network switches, and drive 12v cooling fans if a set point is exceeded. I have seen some possible issues with the 110/240v version of this product, but I have no concerns at 12v. The PCB could have been a little thicker, the casing could have been sturdier, but no complaints at this price point and low voltage use. The displayed temperature tracks well against reference thermometers, +/- 0.2c. You may also wish to consider the STC-3018 (I do not have this - but it appears to show both the environment and set points on the display).
alex
2025-05-09 14:05:13
The media could not be loaded.
Eitan D Zur
2025-04-29 17:40:27
Works as advertised, easy to wire.
Colin Dietrich
2025-04-23 14:54:51
Works as described. The sensor is labeled as 'NTC' which strictly speaking means it's a negative temperature coefficient thermistor. For anyone trying to swap probes or fitting the probe in something I measured the following:Diameter: 4mmResistances (in ohms) @ Temperature (degrees C): 16.0 kΩ @ 0 C, 5.52 kΩ @ 50 C, 1.40 kΩ @ 100 CSince neither are specified in the product specifications, don't be surprised if they change in the future.
BobH
2025-03-29 13:54:54
The product info didn't explain if settings are stored during AC power loss (blackout).I was glad to find: they are!If it was off, it stays off.If it was on, it comes on again.Temperature setpoints are kept too.So this tolerates power interruption just like a mechanical thermostat would. Handy!
Garan
2025-03-15 17:29:31
This temperature controller was 220VAC but with the same voltage i connect to 120 volt and wors well too. I am happy with this purchase.Than you
Thonas
2025-03-01 14:07:00
This is absolute garbage. The instructions are a nightmare. So confusing and you can understand how to program it.
twanna hamlin
2025-01-24 18:19:43
Would order again.
R. Carpenter
2024-12-09 11:52:14
Yeah, Celsius is the worldwide favored temperature scale, but the biggest economy is STILL the USA which does everything in fahrenheit. This gauge doesn't allow fahrenheit readings.
GC.
2024-11-30 09:16:08
Using this to monitor temperature of network switches, and drive 12v cooling fans if a set point is exceeded. I have seen some possible issues with the 110/240v version of this product, but I have no concerns at 12v. The PCB could have been a little thicker, the casing could have been sturdier, but no complaints at this price point and low voltage use. The displayed temperature tracks well against reference thermometers, +/- 0.2c. You may also wish to consider the STC-3018 (I do not have this - but it appears to show both the environment and set points on the display).
Recommended Products
