Your cart is empty.
Your cart is empty.Product Description
Product Description
recise Fit and Easy Installation
Specifically designed for LS1, LSX, LS2, LS3, LQ4, LQ9, LS6, L92, L99, L33 5.3L, 4.8L, 5.7L, 6.0L, and 6.2L engines, this block off plate effortlessly fits and securely seals to the oil pan.
Durable and Lightweight
This LS Billet Oil Plate is made from high-quality 6061 aluminum alloy, offering superior durability and strength. It features a black anodized finish that boosts its corrosion resistance and extends its lifespan.
Package Contents:
Comes with 2 bolts, 1 O-ring, and billet aluminum port cover plate.
Carolina
2025-09-04 14:53:50
Works as it should, and seems well made
Mariano Rodino
2025-09-02 11:14:03
I needed to replace the original oil cooler block off plate on my 2008 Silverado 5.3L and it fit perfect. Best part so far is it comes with a gasket so I was able to get rid of the metal "gasket" with this replacement.
ironman
2025-08-22 13:49:32
Inexpensive, does not leak,and quick shipping made this an excellent purchase for replacing the factory oil cooler delete housing on my 2006 5.3
Aliviana York 2.0
2025-08-20 15:10:52
Pappy sez, It's a good looking block off plate. It's a shame no one will ever see it.
BigFishRacing
2025-07-03 15:46:28
This cooler block off plate is machined well and has a nice anodized black finish. The o-ring fits tights and won't fall out while installing the plate. This kit includes A2-70 stainless grade fasteners. There are no torque specs listed with the kit, but factory torque spec is around 9 ft lbs. You will need to go closer to 15 ft lbs to actually get the plate to sit flush against the oil pan face. One thing that concerned me is the 'well' inside the plate for oil to pass through is not very deep compared to the factory block off, which I was worried would reduce oil pressure. So far that has not been an issue. If you own a 2WD truck this will be a super easy install. If you own a 4WD truck, you will need to drop the front driveshaft to get it out of your way (as seen in my photo). Overall I think this is a decent kit and recommend it.
Jamjam92
2025-06-27 16:07:31
This is a good quality piece. Fits as it should and installs easily.
Marisa C.
2025-06-23 13:27:23
See the pictures. It seems then edges of the oil supply holes didn’t line up with the cavity or cut the o ring. 2006 gmc 4.8
Jennifer Rouse
2025-06-21 18:30:20
Worked good. Well until the engine got up to temp and pressure. It leaked and I had to place another seal and hard gasket to fix it. But it was a little short.
Carolina
2025-05-27 12:27:40
Works as it should, and seems well made
Mariano Rodino
2025-05-08 15:28:09
I needed to replace the original oil cooler block off plate on my 2008 Silverado 5.3L and it fit perfect. Best part so far is it comes with a gasket so I was able to get rid of the metal "gasket" with this replacement.
ironman
2025-04-16 10:25:41
Inexpensive, does not leak,and quick shipping made this an excellent purchase for replacing the factory oil cooler delete housing on my 2006 5.3
Aliviana York 2.0
2025-01-30 11:29:27
Pappy sez, It's a good looking block off plate. It's a shame no one will ever see it.
BigFishRacing
2025-01-24 16:02:31
This cooler block off plate is machined well and has a nice anodized black finish. The o-ring fits tights and won't fall out while installing the plate. This kit includes A2-70 stainless grade fasteners. There are no torque specs listed with the kit, but factory torque spec is around 9 ft lbs. You will need to go closer to 15 ft lbs to actually get the plate to sit flush against the oil pan face. One thing that concerned me is the 'well' inside the plate for oil to pass through is not very deep compared to the factory block off, which I was worried would reduce oil pressure. So far that has not been an issue. If you own a 2WD truck this will be a super easy install. If you own a 4WD truck, you will need to drop the front driveshaft to get it out of your way (as seen in my photo). Overall I think this is a decent kit and recommend it.
Jamjam92
2025-01-14 17:48:27
This is a good quality piece. Fits as it should and installs easily.
Marisa C.
2024-12-25 11:41:36
See the pictures. It seems then edges of the oil supply holes didn’t line up with the cavity or cut the o ring. 2006 gmc 4.8
Jennifer Rouse
2024-12-24 20:30:56
Worked good. Well until the engine got up to temp and pressure. It leaked and I had to place another seal and hard gasket to fix it. But it was a little short.
Recommended Products