Your cart is empty.
Your cart is empty.Product Description
Powerbuilt Coil Spring Compressor Kit
Remove and install straight or curved springs made of wire up to 3/4” in diameter with this coil spring compressor kit. One piece tool fits inside the spring, saving you the trouble of tightening a pair of coil compressors on the outside.
Made of strong chrome vanadium, this compressor has a long arm and a short arm on each end which allows them to follow the curved shape of the spring more easily.
The finishing touch? All Powerbuilt installer kits meet or exceed ANSI and/or ASME standards.
- Removes and installs straight or curved springs made of wire up to 3/4” in diameter
- Durable storage case with step-by-step instructions
- Precision-built to meet or exceed ANSI standards
- Kit #2
Set includes:
- 4 hooks
- 4 plates
- 3 washers
- 4 bolts
- storage case
David Kettren
2025-09-04 12:45:56
This worked great. Didn’t slip on the tubing at all
Diane DiPaolo
2025-07-29 14:51:09
Don’t take chances when compressing springs. This works like it should and is sturdy.
Kurt
2025-07-23 15:19:57
I found the handle bends quite easily while twisting down for a good flare, but if your paying attention it can be avoided. Other than that, good stuff for a weekend warrior
michael myers
2025-07-14 11:10:23
I don’t know how many years I spent splitting break lines that needed to be double flared great tool good storage box also
Robert J Chiarizia
2025-06-30 10:16:27
Cheap crap sums up this tool kit. The threads on the flare come stripped out on The first go simply flaring soft COPPER! What if I was flaring steel lines? Threads are too fine and the pot metal too cheap. AutoZone has a better quality value version.There is one good item in this tool kit, the pipe bender is good, no complaints there.The flaring rig is cheap with loose tolerances, poor quality metal, and bevels on both sides, although one side looks more like a chamfer the machinists went overboard with.SAVE YOUR MONEY, buy a higher quality brake line flaring tool kit. I found the Titan products to be professional grade brake line flaring tooling.
jess
2025-06-23 17:28:35
Works good for flaring brake lines. Good enough quality if you only need it here or there. Got the job done flaring the lines after replacing all of them on my s10. Not a bad price
Devin
2025-06-05 15:03:59
This flare kit made about 3 good double flares before it started consistently producing flares that were offset. Wasted a few feet of line before I gave up and bought a HF kit that worked much better. The pipe cutter did maybe 5 or 6 cuts before the blade chipped. The only piece that really worked well was the deburr tool.
Daniel A. Davis
2025-06-01 15:10:06
I bought this kit to remake the brake lines in my classic car. I had never done any line making before, but after watching a few videos on YouTube, I felt confident. I had no trouble using this kit to bend and flare new brake lines. I was concerned about the quality due to the price, but every piece performed just fine. Case is good quality, too.
Betillo Mackoy
2025-04-30 12:32:01
Lo he ocupado 4 veces y ha funcionado bien.
Emil
2025-03-17 15:18:54
Probably not a pro-tool, but works fine. No defects, or malfunctions. I'm happy and i have new brake lines.
هنادي الØربي
2025-03-05 20:34:25
ممتاز
S
2025-01-22 17:13:59
V. Good.
Reid
2025-01-09 20:13:55
It's a good tool and cheap
Recommended Products
$56.50
$ 25 .99 $25.99