Your cart is empty.
Your cart is empty.Product Description
The YIHUA 948 Desoldering & Soldering 2-IN-1 station combines a desoldering station with a soldering station
The package includes:
1 x YIHUA 948-I Desoldering Station
1 x Detachable Desoldering Gun
1 x Detachable Soldering Iron
1 x 100% Metallic Holder (fits iron + gun)
4 x Desoldering Nozzles (Ø0.8/1.0/1.2/1.2mm)
2 x Filter Springs
1 x Set of Cleaning Pins
1 x Set of Rubber Retainers
1 x Heat-Resistant Silicone Pad
1 x Additional Filter Chamber
10 x Carbon Filter
Desoldering Station
Adjustable Temperature: 716~896°F
Temperature Stabilization: via PID Temp. Control
Sleep Mode: 5, 10, 15, 20, 30 mins Adjustable
Soldering Station
Adjustable Temperature: 392~896°F
Temperature Stabilization: via PID Temp. Control
Sleep Mode: 5, 10, 15, 20, 30 mins Adjustable
2-IN-1
You can use either the Soldering Station or the Desoldering Station based on your work, both the soldering iron and the desoldering gun connects to the station via a contact safe receptacle.
Pump Powered Suction
Vacuum Pressure: 0.5Mpa (measured from nozzle)
Vacuum Pump: Activated via Trigger (available after 3-minute preheat)
Desoldering: Suitable for double sided PCB through-hole desoldering, not applicable for components with square pins and computer PCB.
Better desoldering
The station will preheat for around 5 minutes when turned ON, and beep 3 times when the station is ready to go. This allows the station to heat the internal desoldering mechanism sufficiently to provide better heat transfer and quicker recovery time. So, the desoldering gun won’t clog up due to misuse under insufficient heating.
Sleep Mode
The station enters sleep mode when non-use is detected for longer than the set timer duration, and the desoldering gun/soldering iron idles at a lower temperature to reduce unnecessary wear on the nozzles/iron tips and the heating elements. You can set the timer from 1~99 minutes based on your needs, or set the timer value to 0 to turn OFF this function.
Loaked
2025-08-09 17:51:48
I’ve been restoring old audio equipment for a while now and have always used a cheap solder sucker and soldering iron to remove components. I decided to pick this up and holy smokes, why in the heck didn’t I buy one years ago. No more messed up solder pads. This thing works amazing, it’s incredible, and worth every penny! Only gripe is the soldering iron plug is different than the same brand soldering station so the irons are not interchangeable, it’s stupid. Like why use a different plug when the irons are exactly the same. Anyway, still worth it even if it was twice the price I had no idea these things work sooo good.
Debby
2025-07-16 14:15:13
Works great but you need to run the cleaning wire through the desoldering tube about every 10 minutes in order to keep the vacuum tube open. If it clogs, there is no problem to disassemble and clean this sucker. Really pleased, comes with spare parts too and you can purchase tips on Amazon.
Rosemary bates
2025-05-11 14:06:49
Works well. A whole lot easier than fussing with braid...
Patrick
2025-04-21 11:54:58
2024 Update: been using this for the past year plus and dealing with the quick clogging. was removing a through hole IC yesterday and the base changed tone with the trigger pressed and started smoking. fist time I have had to use it back to back semi quickly on more then 4 pins. guess its time to upgrade. :(when it works, it works great. But in a year now I have already had the heating element in the gun fail once. Contacted the company and they were understanding and did send a new gun end to me. I have used the new one a few times and now its clogged...again. I have tried to clear it and cant, so not it sits on my bench as a paperweight. not impressed, but you get what you pay for I guess.
Alejandro Zepeda
2025-04-17 16:34:52
I'm not that good at desoldering and was struggling with a recent project,so I decided to get this item.What was taking me hours was done in a few minutes as the machine just sucks up the solder with no issues.The solder also works great.The price was very cheap compare to some I found online that cost $500 or even over $1000.
David S.
2025-04-02 11:39:18
The media could not be loaded.
PDT
2025-03-13 11:28:01
This station works OK as long as you keep the de-soldering iron cleaned after each use. It clogs fairly quickly, maybe every 40-60 pins de-soldered. For the price, I can't complain. It comes with several different desoldering tip sizes, which don't appear to be labeled - through trial and error, you have to find the right tip that works the best for your scenario. With this station, I desoldered and then socketed all the existing chips and/or chip sockets on a Commodore 64 long type motherboard. This tool was up to the task as long as I kept the extracted solder cleaned out, and had the correct tip. As a soldering station, I have no complaints - it works great and heats up the soldering iron within a few seconds. Heating up the desoldering iron takes about a minute.
durango_ro
2025-01-27 15:02:35
I was very happy to received the unit. It worked perfectly for me as I do not use it often. Easy to setup and use.
Daniel Lafrance
2025-01-22 15:19:52
Je suis un électronicien qualifié PACE niveau 2 et après deux jours d’utilisation il me semble que le pistolet à déssouder fonctionne très bien. Par contre la pointe du fer est un peu trop arrondi pour souder de petits elements comme les pièces de surface. Malgré tout, cela me semble être un bon rapport qualité/prix pour un équipement pour amateur.
Roman M.
2024-11-26 20:40:54
Works well as long as you clean it after use. Before turning off make sure the heated tube is clear by using the provided tools. Also put a dab of solder on the tip before shutting it off. Once the gun cools take out the tube and clean the spring filter. It can be hard to clean and I have had to take a torch to it to remove stubborn solder build up.I like the fact that you get some spare consumables with it (like the spring filter).
Recommended Products