Your cart is empty.
Your cart is empty.The Crescent Solid Auger features optimal cutting edges to create precise, clean holes in wood drilling applications. It has 40% more cuts per charge from its precision tip and the 2 flute design provides ultimate chip removal with reduced cutting friction. The Crescent Solid Auger is 10X faster with its triple sharpened high speed steel.
Cody C.
2025-08-17 18:52:08
Worked great for pre drilling some 5/8" bolt holes for my fence gates.
Matthew W.
2025-06-20 18:36:39
This bit cut through treated oak 6x6 like it was nothing once it was on a good drill.
Ron
2025-06-10 10:05:51
I tested this out not really what it was intended for. I had a tree stump with roots and I used this tool to drill enough holes into it so I can snap the roots. Made it easier to break dow tree roots in the dirt. Saying this the wood/roots in the ground has a granular dirt and sand which this drill had no problem. The flutes ejected the material out fast. Stays sharp for a long time. One thing to keep in mind this drill gets hot if you are drilling hard wood so let it cool for a few seconds, between cycles of drilling.
Matthew Pedersen-howard
2025-05-15 10:34:13
Like the hex head so that it doesn’t slip unlike a cylinder drill bit can. Reasonably priced and works well. Good range and recommend for wood drill bits.
David Billman
2025-04-15 10:03:37
It’s pretty good but the spider blue bit at Lowe’s out performs it twice over Sam size we’re driol 2/2 holes in red oak 12 inches thick on a log cabin.👅
Nathan Banks
2025-04-04 15:13:56
I bought this 7.5" x 7/8" Auger bit specifically because it was one of the few tools of this type on Amazon that advertises a "1/4" quick-release hex shank provides optimal performance in both impact drivers and drills." (Direct quote from product description.When the bit was delivered, I discovered that in fact it has a *7/16"* shank, which makes it too large to fit in a standard chuck (as, for example, the chuck on my battery powered Black & Decker drill). I am really annoyed that this advertising mistake cost me $12 and I still can't drill the holes I need. :( :( :(
Andres Valdes
2025-03-18 15:23:29
I needed to open two 1 3/8 holes on a 6x6 post for a pull-up station I am building. I can't believe how easy and smooth it cut through the post. I certainly see me using it in many other projects in the future.
Paul H
2025-03-15 13:11:44
This product is inaccurately described as having a 1/4" chuck size and I noticed that Amazon flagged it prior to the order that it was a high return item. Unsure why, I pressed on and now see that it will not fit a "normal" drill having a 3/8" chuck. The drill bit requires a 1/2" chuck minimum and I'm not buying a new drill for one drill bit.
Ted
2025-03-13 10:27:42
Exactly what was described
Me
2025-02-27 16:17:12
You really have to push to drill through a cedar post.
Fred
2025-02-19 12:56:24
this drillbit did wonders I drilled 75 Holes Way down into a tree stump in order to allow the weather to get into it to rot it out, and it had no problem cutting through the wet wood
Oli Hajzler
2025-01-31 13:08:50
Drills as expected. Has a long reach...
Recommended Products
