Your cart is empty.
Your cart is empty.Product Description
802 Titanium Heater Rod
Specification:
- Model: HG-802
- Voltage: 110V-120V, 60HZ
- Power cord length: 5.5 ft
Warm Tips:
- Always keep heater rod and probe fully submersible.
- Before take out the heater, please disconnect power and wait for 30 minutes to cooling down.
- Must be used with 802 controller
without controller
Available in: 200w/500w
Replacement heater rod of hygger 802 heater. It must be used with 802 controller together to heat up aquarium.
- 200 Watt, for 20~45 gallon aquariums
- 500 Watt, for 60~120 gallon aquariums
Features:
- IP68 100% Waterproof, Fully Submersible
- Titanium Tube, Shatterproof construction, Corrosion Resistant
- Ideal for used in freshwater and saltwater aquarium.
How to set temperature:
- Place both heater rod and probe inside the aquarium and keep both fully submerged.
- Plug in power and you can see the red light indicator on and LED digital number display current water temperature.
- Press button to your desired temperature which will blinks 3 seconds and then it return to current water temperature.
- The heater begins to heat.
Attention:
1. This heater is not for suitable for use in acrylic tank.
2. This heater is not for suitable for use in turtle tank as no guard.
3. Do not bury it undergravel as gravel not conduct heat
4. Do not use heater rod alone! To avoid overheating, it must be worked with thermostat and temperature detector. Keep heater and thermal detector submerged
5. We don't suggest to use this temperature controller for other brand heater for security reasons.
Juscrusing
2025-07-11 13:36:32
I connected this to an Inkbird even though Hygger says it must be used with their controller. Works just fine for a lower price than I found for others that are made for any 3rd party external controller. I didn't want a glass surround element for fear of it shattering and always a fear I will be electrocuted when I reach my hand in the tank lol.
ok chau
2025-06-12 09:40:21
Good deal as a backup heater
Roger S
2025-06-05 17:39:48
Plug and play fixed 500 watt heater. Comes with 3 prong plug for use with controller or on/off switch strip for continuous use. I use with a timer to hold 100 degree water temp.
Greg Arnold
2025-05-30 18:49:05
I am a big fan of these heater rods. I breed fish and have 45 tanks that most all of them have this setup. I use these with the inkbird controllers and really like them. I will eventually replace the few heaters with these as those give up the ghost. They heat your tanks quickly and last. Once you try them you'll only want them. Thanks hygger!
John S.
2025-03-15 09:01:01
*Updated - After my first review Hygger reached out and sent a replacement heater, amazing! In that time I had since bought another heater so it's nice knowing a have a new extra one laying around if my BRS were to ever take a crap. Thanks Hygger(Original) Didn't last very long... Last 3 days longer out of the return window
Ryan
2025-03-14 17:35:58
I went to these to get away from glass for my reef tank where I need the reliability 3 months in and no issue the cycle great with my rainbird heater controller i.couldnt ask for a better heater
Magnus
2025-03-08 15:57:15
I think many people may be shocked if they buy this and then realize they've boiled their fish.This is not like the heaters you buy in the pet shop, where there is a thermostat built-in and it will hold that temperature for you. Nor is there a pre-set temperature on this. This thing will just keep pumping maximum heat out until the power is cut off.And that is by design.If you plug this into a standalone thermostat with submersible temperature probe, this thing is great. More accurate with that setup, and more reliable. I'm using this kind of setup to heat the sump that is filtering water for a betta barracks rack. All the fish in the rack are critically endangered species so I need trustworthy gear. This works very well, if you use them as intended.
Tom Sellers
2025-02-23 16:21:12
Update : Sept 2024This is the third and last of these heaters i will ever use! All three have created electric currents in my marine aquariums. The first 2 were on a biocube 32 and this one is paired with a different brand and controlled by an Innovative Marine Helios which can support upto 1000 watts. Wish I cld get a refund but I'm now just outside the return period.I have several friends that use these in their freshwater aquarium without problems. Maybe the freshwater aquariums don't experience this because the water isn't as conductive as saltwater.______________________________________________________________________Loved this heater at first but having to buy a replacement every 3 to 4 months is insane! The first one came with the kit and it lasted abt 3 months before it blew. The second one did great for abt 3 months and is still working but is sending am electric current into the water that I didn't realize until I stuck my hand in the water. Not enough to hurt but def am irritant! Cldnt imagine being a fish or my coral coral living in a state of constant shock and pain!Biocube 32 reef aquarium.
Shao
2025-02-02 15:37:10
This is a heating element only, I have this plugged into a controller. Seems to be working fine so far.
Recommended Products
$35.20
$ 15 .99 $15.99